A swimming pool on the plot of a country house is good. But just a concrete bowl filled with water is not a swimming pool, but an unnecessary structure on the plot. For the pool to function, all communications must be connected to it, the water intake system must work clearly, the water must be periodically cleaned and filtered. Otherwise, all the water in the pool will turn into a dirty puddle. What is a concrete pool skimmer and what is it used for? How to install a skimmer in a concrete pool?
The right skimmer – long-lasting work
Any skimmer-type pool must have a skimmer installed – a kind of pump built into the pool walls, to which water intake pipes are connected. If the pool is overflow, then there is a different water supply and drain system. How to install a skimmer in a concrete pool? As a rule, this is done during the construction of a concrete bowl. In concrete pools, the water level is below the level of the side. Water from above goes to the filtration zone, then to the heating device and is fed into the tank. All these components must be included in the pool design. IMPORTANT! The skimmer must be installed so that the minimum and maximum level marks are in accordance with the instructions. If all work is done correctly, the pool will serve you for a long time and without interruption. Therefore, the installation of a skimmer in a concrete pool must be performed by professionals. An amateur may miss some important detail, which will then harm the water filtration process in the pool.
It is thanks to it that the pool water will never bloom, will not be covered with dirt, algae, will constantly move and will be cleaned of small contaminants. The principle of operation of the equipment in a concrete pool is to carry out water intake, supply water to the heater and filter. After which fresh, clean, heated water enters the pool. A circulation pump is connected to the skimmer, which helps to ensure the movement of water flows. The number of skimmers and nozzles is selected individually by the engineer. For uninterrupted operation, it is necessary to clean the filter tank.
Types of skimmers
There are 2 main types:
- mounted or floating
- built-in
The material they are made of:
- plastic
- stainless steel
One mounted skimmer can clean a pool area of 25 square meters or 20-40 cubic meters of water. If the pool is larger, then you will need several such devices. Built-in ones are preferred, as they do not take up additional space and do not spoil the overall look of the pool. Plastic skimmers are also particularly popular, as they are cheaper and can be used for a long period.